Invoice Electronics Engineer in France Marseille –Free Word Template Download with AI
123 Avenue du Prado
13008 France Marseille
Tel: +33 4 91 00 00 00
Email: [email protected]
SIRET: 123 456 789 00012 | TVA Intracommunautaire: FR 12 123456789
Invoice Number: INV-2023-10-045
Date of Issue: October 24, 2023
Due Date: November 23, 2023
Payment Terms: Net 30 Days
Bill To
Marseille Maritime Industries S.A.S.
Attn: Procurement Department
45 Quai du Port
13002 France Marseille
France
Project Reference
Project: Automated Port Logistics Control System
Phase: Firmware Integration & PCB Validation
Location: Marseille Logistics Hub, Sector 4
Contact: Jean-Pierre Dubois (Site Manager)
| # | Description of Services | Hours/Qty | Rate (EUR) | Amount (EUR) |
|---|---|---|---|---|
| 1 |
Electronics Engineer Consultation: System Architecture Review Comprehensive analysis of the existing control unit architecture for the automated cranes. This service includes evaluating power distribution efficiency, signal integrity analysis for high-speed communication buses, and recommending component upgrades to withstand the harsh saline environment typical of the France Marseille port infrastructure. |
12.0 | 120.00 | 1,440.00 |
| 2 |
PCB Design & Schematic Capture Custom Printed Circuit Board design for the new sensor interface module. The Electronics Engineer performed multi-layer stack-up design, impedance matching for differential pairs, and thermal management simulation. This ensures reliable operation under the high ambient temperatures frequently experienced in Marseille during summer months. |
24.0 | 120.00 | 2,880.00 |
| 3 |
Firmware Development & Embedded C Programming Development of low-level driver code for the ARM Cortex-M4 microcontroller. The Electronics Engineer implemented real-time operating system (RTOS) tasks for sensor data acquisition and motor control loops. Code optimization was performed to ensure deterministic response times critical for safety systems in the France Marseille industrial zone. |
40.0 | 120.00 | 4,800.00 |
| 4 |
On-Site Testing & Calibration at Marseille Facility Physical deployment and testing of prototype units at the client's facility in France Marseille. The Electronics Engineer conducted electromagnetic compatibility (EMC) pre-compliance testing, verified isolation voltages, and calibrated analog inputs against reference standards. This on-site service ensures the hardware meets local regulatory requirements. |
16.0 | 130.00 | 2,080.00 |
| 5 |
Technical Documentation & Compliance Reporting Preparation of detailed engineering reports, including schematic diagrams, bill of materials (BOM), and test results. The Electronics Engineer ensured all documentation aligns with European CE marking standards and specific safety protocols required for industrial equipment operating in France Marseille. |
8.0 | 100.00 | 800.00 |
Payment Instructions
Please make payment via bank transfer to the following account:
Bank: BNP Paribas, Marseille Vieux-Port
IBAN: FR76 3000 4000 0000 0000 0000 001
BIC: BNPAFRPPXXX
Reference: INV-2023-10-045
Terms and Conditions
1. This Invoice represents the final settlement for the Electronics Engineer services rendered as described above.
2. Payment is due within 30 days of the invoice date. Late payments may incur interest at the statutory rate applicable in France.
3. All intellectual property rights regarding the custom firmware and PCB designs remain with ProTech Electronics Engineering until full payment is received.
4. The services provided by the Electronics Engineer are guaranteed for a period of 12 months from the date of final acceptance, covering defects in design and workmanship.
5. Any disputes arising from this contract shall be subject to the jurisdiction of the courts of France Marseille.
6. This document is issued in accordance with French commercial law and EU invoicing directives.
⬇️ Download as DOCX Edit online as DOCXCreate your own Word template with our GoGPT AI prompt:
GoGPT