Invoice Welder in Pakistan Islamabad –Free Word Template Download with AI
Plot 45, Industrial Area, I-9/3
Islamabad, Pakistan
Phone: +92-51-2345678 | Email: [email protected]
NTN: 1234567-8 | STRN: 9876543-2
PENDING PAYMENTBilled To
Al-Madina Construction & Engineering Ltd.
Office 12, Blue Area, Jinnah Avenue
Islamabad, Pakistan
Contact: Mr. Ahmed Raza Khan
Phone: +92-300-1234567
Email: [email protected]
Welder / Service Provider
Master Welder: Tariq Mehmood
Certified AWS D1.1 Structural Welder
Specialization: MIG, TIG, Stick & Pipe Welding
License No: WLD-PAK-2019-4452
Based in: Pakistan Islamabad
| # | Description of Welding Service | Welder / Technician | Qty / Hours | Rate (PKR) | Amount (PKR) |
|---|---|---|---|---|---|
| 1 | Structural steel frame welding for commercial building, Sector F-10, Islamabad. Includes MIG welding of I-beams, channels, and plates per AWS D1.1 standards. | Tariq Mehmood (Lead Welder) | 48 hours | 3,500 | 168,000 |
| 2 | TIG welding of stainless steel piping system for HVAC installation, 120 meters of 2-inch and 4-inch diameter pipes. | Usman Ali (TIG Specialist) | 36 hours | 4,200 | 151,200 |
| 3 | Repair and reinforcement welding of existing bridge support structure, Margalla Hills Road, Islamabad. Stick welding with E7018 electrodes. | Tariq Mehmood & Bilal Hussain | 24 hours | 3,800 | 91,200 |
| 4 | Fabrication and welding of custom steel gates and railings for residential compound, DHA Phase 6, Islamabad. Includes cutting, fitting, and finishing. | Welding Team (3 Welders) | 60 hours | 2,800 | 168,000 |
| 5 | Welding consumables: MIG wire (1.2mm ER70S-6), TIG filler rods (308L), E7018 electrodes, grinding discs, and protective gas (Argon/CO2 mix). | N/A (Materials) | 1 lot | 85,000 | 85,000 |
| 6 | Welding equipment rental: 2x Lincoln Electric MIG machines, 1x TIG inverter, 1x plasma cutter, and associated safety gear for on-site deployment in Pakistan Islamabad. | N/A (Equipment) | 15 days | 12,000 | 180,000 |
| 7 | Quality inspection and non-destructive testing (NDT) of all welded joints. Visual inspection, dye penetrant testing, and magnetic particle inspection per BS EN ISO 17637. | Certified NDT Inspector | 12 hours | 5,500 | 66,000 |
| 8 | Travel and mobilization charges for welding crew and equipment from workshop to multiple job sites across Islamabad, Pakistan. | N/A (Logistics) | 1 lot | 25,000 | 25,000 |
| Subtotal | PKR 934,400 |
| GST (17%) | PKR 158,848 |
| Discount (Early Payment 5%) | - PKR 46,720 |
| Grand Total | PKR 1,046,528 |
Terms & Conditions of This Invoice
- This Invoice is valid for 30 days from the date of issue. Payment must be received by 30 June 2025 to avoid late payment penalties of 2% per month.
- All welding services performed by our certified Welder team in Pakistan Islamabad comply with Pakistan Standards and Specifications (PS&S) and applicable AWS/ISO international welding codes.
- The Welder and all technicians listed on this Invoice are fully insured under the Pakistan Social Security Institution (PSSI) and carry valid professional liability coverage.
- Payment may be made via bank transfer to: Meezan Bank, Islamabad Branch, Account Name: Islamabad Precision Welding Services, IBAN: PK00MEZN000012345678901234.
- All work completed under this Invoice carries a 12-month warranty on structural welds and 6-month warranty on decorative and repair welds, valid throughout Pakistan Islamabad and surrounding regions.
- Any additional welding work requested beyond the scope defined in this Invoice will be subject to a separate quotation and supplementary Invoice.
- The client acknowledges that the Welder has the right to withhold completion of work until full payment of this Invoice is confirmed in writing.
- This Invoice is governed by the laws of the Islamic Republic of Pakistan. Any disputes shall be resolved through arbitration in Islamabad, Pakistan, in accordance with the Arbitration Act 1940.
Create your own Word template with our GoGPT AI prompt:
GoGPT